SignalTender B2B, GovCon & LegalTech MCP Server

• analyze_debriefing_bid_protestFree

  Analyze an Unsuccessful Offeror Notice, SSEB evaluation scorecard, RFP Section M criteria, and submitted proposal excerpts to generate strategic FAR 15.506 / DFARS 252.215-7016 Enhanced Debriefing follow-up questions, a 0-100 GAO Bid-Protest Viability Score, a Go/No-Go protest recommendation, CICA 31 U.S.C. 3553 automatic stay deadline calculations, a 4-C.F.R. Part 21 Protest Grounds Matrix (Unstated Evaluation Criteria, Disparate Treatment, Flawed Best-Value Tradeoff, Misleading Discussions), and an Executive Recompete/Corrective-Action Playbook. This is a read-only, stateless post-award diagnostic and debriefing analysis call that provides structured procurement intelligence rather than formal legal representation (requires X-RapidAPI-Key; `unsuccessful_offeror_notice_and_debrief_text` accepts 30 to 100,000 characters, `rfp_section_m_and_submitted_proposal_excerpts` accepts 30 to 100,000 characters, optional `award_and_debrief_timeline_context` anchors the 10-day GAO filing and 5-day CICA stay clock, and `target_acquisition_regime` calibrates rules across DoD DFARS Enhanced Debriefings, Civilian FAR Part 15, FAR 16.505 Task Orders >$10M/$35M, and FAR 8.405-2 GSA MAS). Use this tool after contract award notification when preparing for a FAR 15.506 post-award debriefing or evaluating GAO/COFC bid-protest grounds; use `match_capability_statement` instead for pre-bid Gate-1 Bid/No-Bid Pwin scoring, or `analyze_rfp_amendment_diff` for pre-award SF-30 solicitation amendments.

• analyze_rfp_amendment_diffFree

  Diff base RFP/SOW text against subsequent SF-30 Solicitation Amendments, SLED Addenda, and official Government Q&A logs to flag altered `shall`/`must` mandates, deadline extensions, page-limit revisions, CLIN pricing changes, de-facto Q&A requirements, and invalidated proposal sections with Shipley redraft language. This is a read-only, stateless change-impact analysis call (requires X-RapidAPI-Key; `base_solicitation_text` and `amendment_or_qa_text` accept up to 100,000 characters each, and providing optional `current_proposal_outline` enables targeted auditing of which specific drafted proposal volumes/pages are invalidated). Use this tool whenever an agency issues an SF-30 amendment, addendum, or Q&A response matrix after initial RFP release; use `generate_compliance_matrix` instead when shredding an initial base RFP for the first time.

• answer_security_questionnaireFree

  Draft audit-ready responses to vendor security questionnaires (SOC 2, ISO 27001, FedRAMP Moderate/High, NIST SP 800-171 Rev 2/3, CMMC 2.0, CAIQ/SIG/HECVAT) with cross-framework control citations, an estimated DoD SPRS score (-203 to 110), required evidence artifacts, and POA&M remediation items for any control gaps. This is a read-only, stateless advisory responder (requires X-RapidAPI-Key; maps each question in `questionnaire_text` against the vendor's `security_posture_summary`, while `target_framework` selects 'auto_detect' [default] or locks control citations to a specific standard and flags any unsupported controls as 'Partially Met' or 'POA&M Required' rather than fabricating compliance). Use this tool when completing customer due-diligence questionnaires, SSP control tables, or DoD SPRS self-assessments; use `scan_far_dfars_clauses` instead to audit FAR/DFARS solicitation clauses, or `generate_compliance_matrix` for general RFP Section C/L/M requirements.

• audit_contract_risksFree

  Audit commercial and B2B legal agreements (MSAs, NDAs, SaaS terms, subcontracts) to detect high-risk clauses, compute a 0-100 overall risk score, and generate verbatim clause quotes paired with ready-to-paste fallback redline language. This operation is read-only, stateless, and non-destructive (requires X-RapidAPI-Key; `raw_text` accepts 50 to 100,000 characters, and `party_perspective` shifts redline rewrites to protect the 'vendor', 'buyer', or 'neutral' counsel). Use this tool when reviewing commercial/legal terms (indemnification, liability caps, IP ownership, termination for convenience); use `scan_far_dfars_clauses` instead for federal FAR/DFARS/CMMC regulatory flow-down audits, or `parse_b2b_contract` for basic metadata extraction.

• classify_naics_psc_nigpFree

  Map any company profile, product description, or Statement of Work (SOW) into ranked 6-digit NAICS codes (with official SBA Small Business Size Standards in revenue or headcount), 4-digit SIC codes, 4-character Federal PSC codes, and State NIGP/UNSPSC commodity codes. This is a read-only, stateless taxonomy classification call (requires X-RapidAPI-Key; `description_text` is required, `context_type` tunes code selection for vendor KYB profiles vs. RFP scopes, and `max_secondary_codes` [1-5, default 3] controls how many secondary NAICS/PSC alternatives are returned alongside the primary code). Use this tool whenever you need industry, procurement, or KYB taxonomy codes and SBA small-business size caps; use `search_historical_awards` instead to query past contract awards once you have a NAICS code, or `parse_b2b_contract` to extract contract dates and dollar values.

• extract_pricing_scheduleFree

  Extract multi-tier CLIN/SLIN pricing schedules, GSA/T&M labor rate cards, vendor quotes, and Bill of Materials (BOM) tables from unstructured text into normalized JSON with automated line-item math auditing. This is a read-only, stateless extraction call (requires X-RapidAPI-Key; `document_text` accepts 20 to 100,000 characters, `expected_document_type` optionally hints the table schema, and `audit_math_and_anomalies` [default true] verifies `quantity * unit_price == extended_price` and flags arithmetic discrepancies). Use this tool when parsing pricing tables, CLIN schedules, invoices, or labor rate cards; use `parse_b2b_contract` instead for general contract dates/parties/deliverables, or `search_historical_awards` to look up historical government award prices.

• generate_ato_rmf_packageFree

  Transform RFP cybersecurity clauses, system architecture descriptions, and cloud hosting baselines into a NIST SP 800-53 Rev 5 / DoDI 8510.01 RMF / FedRAMP / StateRAMP Authority to Operate (ATO & Continuous ATO) package with FIPS 199 / CNSSI 1253 security categorization, System Security Plan (SSP) control inheritance matrices, eMASS/CSAM-ready Plan of Action & Milestones (POA&M) schedules, Continuous Monitoring (ConMon) DevSecOps blueprints, and Shipley proposal narratives. This is a read-only, stateless generative authorization modeling call (requires X-RapidAPI-Key; `system_architecture_and_rfp_cyber_text` accepts 40 to 100,000 characters, `cloud_hosting_and_inherited_controls_context` accepts 20 to 80,000 characters, and `target_authorization_framework` and `target_impact_level` calibrate control baselines across DoD RMF IL2-IL6, FedRAMP, StateRAMP, and CMMC 2.0). Use this tool when building System Security Plans (SSPs), eMASS POA&M items, FIPS 199 categorizations, or cATO roadmaps for an ATO boundary; use `answer_security_questionnaire` instead to answer vendor security questionnaires and calculate a numeric DoD SPRS score (-203 to 110), or `scan_far_dfars_clauses` to audit FAR/DFARS solicitation clauses.

• generate_compliance_matrixFree

  Shred unstructured RFP Section C (SOW/PWS), Section L (Instructions), and Section M (Evaluation Criteria) text into a numbered `shall`/`must` Requirements Traceability Matrix, Section L-to-M cross-reference map, and annotated Proposal Outline with page allocations. This is a read-only, stateless analysis operation (requires X-RapidAPI-Key; `raw_text` accepts 50 to 100,000 characters, and `proposal_methodology` selects 'shipley' [default Volume I-IV structure], 'federal_standard' [FAR 15.3], or 'commercial_agile' outline conventions). Use this tool first when shredding a base RFP into a compliance checklist and proposal outline; use `analyze_rfp_amendment_diff` instead when comparing an SF-30 amendment against a base RFP, or `generate_rfp_response` to draft the actual prose narrative for a specific section.

• generate_cpars_past_performanceFree

  Transform unstructured project histories, prior contract summaries, and CPARS excerpts into Shipley Section L/M Past Performance Volume III citations with predicted DoD Source Selection Relevance ('Very Relevant' to 'Not Relevant') and Performance Confidence ratings, Scope/Magnitude/Complexity matrices, FAR 42.1503 5-Factor CPARS narratives, and Context-Challenge-Action-Result (CCAR) blocks. This is a read-only, stateless generative evaluation call where relevance/confidence ratings are model-inferred against Section M criteria (requires X-RapidAPI-Key; `rfp_section_l_m_requirements` and `project_history_text` accept up to 100,000 characters, and optional `bidder_role_and_context` calibrates Prime vs. Subcontractor/JV attribution and page budgets). Use this tool when building Volume III Past Performance contract citations and CPARS questionnaires; use `generate_rfp_response` instead for Volume I Technical Approach prose, or `match_key_personnel` for individual staff resumes.

• generate_gsa_mas_offerFree

  Map commercial labor rate cards, software/cloud SKUs, commercial discounting practices, and past project histories into a GSA Multiple Award Schedule (MAS) Large Category F (IT) eOffer or eMod package containing a Special Item Number (SIN) mapping matrix (`54151S`, `54151HACS`, `518210C`, `511210`, `OLM`), a GSA Price Proposal Template (PPT) ceiling rate card grossed up for the 0.75% Industrial Funding Fee (`Net / 0.9925`) with 5-year GSAR 552.238-118 EPA escalation, GSAR 552.238-81 Price Reductions Clause (PRC) / Most Favored Customer (MFC) guardrails, CSP-1 vs. Transactional Data Reporting (TDR) pathway recommendations, and a ready-to-submit SCP-FSS-001 proposal narrative. This is a read-only, stateless, non-destructive compliance and pricing generator (requires X-RapidAPI-Key; `commercial_catalog_and_lcat_rates` accepts 20 to 45,000 characters and `corporate_experience_and_project_context` accepts 20 to 35,000 characters). Use this tool when preparing a GSA Multiple Award Schedule (MAS) eOffer, SIN addition eMod, or GSAR 552.238-81 Price Reductions Clause (PRC) / MFC audit; use `generate_igce_price_to_win` instead for single-RFP IGCE wrap-rate and Price-to-Win modeling, or `match_key_personnel` to tailor individual candidate resumes to LCAT minimums.

• generate_igce_price_to_winFree

  Model an Independent Government Cost Estimate (IGCE), compounded Indirect Wrap-Rate breakdown (Fringe, Overhead, G&A, and Fee/Profit), GSA CALC+ aligned LCAT rate card, multi-year Section B CLIN pricing schedule, 4-scenario Price-to-Win (PTW) sensitivity matrix, and Shipley Volume IV Basis of Estimate (BOE) narrative from RFP Section B/SOW text. This is a read-only, stateless financial modeling and estimation call (requires X-RapidAPI-Key; `rfp_section_b_and_sow_text` accepts 30 to 120,000 characters, optional `historical_benchmark_and_incumbent_context` and `bidder_indirect_wrap_assumptions` anchor indirect multipliers and incumbent baselines, and `evaluation_methodology` calibrates FAR 15.101-1 Best-Value Tradeoff vs. LPTA or FAR 15.404-1(d) Cost Realism). Use this tool when building forward-looking Volume IV Price/Cost models, wrap-rate build-ups, and Price-to-Win targets; use `search_historical_awards` instead to query past FPDS/SAM award records, or `extract_pricing_schedule` to parse an existing vendor quote or invoice table.

• generate_oci_mitigation_planFree

  Audit existing prime/subcontract awards (SETA, A&AS, IV&V, Systems Engineering, Cloud Architecture) against a target solicitation scope to detect Unequal Access to Information, Biased Ground Rules, and Impaired Objectivity under FAR Subpart 9.5 (FAR 9.505-1 through 9.505-4) and generate an OCI Risk Score (0-100), a 3-Pillar Case-Law Audit Matrix, an Organizational Firewall & NDA Control Matrix, and a ready-to-submit OCI Disclosure & Mitigation Plan volume. This is a read-only, stateless, non-destructive compliance and legal-engineering generator (requires X-RapidAPI-Key; `new_solicitation_scope_and_oci_clauses` accepts 20 to 45,000 characters and `existing_contracts_and_corporate_relationships` accepts 20 to 35,000 characters). Use this tool when auditing FAR 9.5 / DFARS 252.209-7008 / 252.209-7009 Organizational Conflicts of Interest or drafting an OCI Mitigation Plan & Non-Disclosure Firewall; use `scan_far_dfars_clauses` instead for general Section I FAR/DFARS flow-down clause scanning, or `generate_teaming_strategy` to structure 13 CFR 125.6 Prime/Sub workshare splits.

• generate_oral_presentation_prepFree

  Generate a FAR 15.102 & Shipley Phase-II Oral Presentation slide-by-slide blueprint, Key Personnel speaker-attributed talking points, a minute-by-minute Live Technical Demonstration / Scenario Challenge runbook with zero-downtime failover contingencies, an adversarial SSEB 'Murder Board' Q&A coaching matrix, and evaluator caucus takeaways from RFP Section L/M oral instructions. This is a read-only, stateless generative preparation call (requires X-RapidAPI-Key; `rfp_oral_instructions_and_sow_text` accepts 30 to 120,000 characters, `proposed_solution_and_key_personnel` maps slides strictly to eligible Key Personnel speakers, optional `known_incumbent_and_risk_areas` sharpens Murder-Board trap questions, and `presentation_format_mode` selects 'COMBINED_ORALS_TECH_DEMO_AND_QA' [default], 'EXECUTIVE_SLIDE_BRIEFING_AND_QA', 'LIVE_TECHNICAL_SCENARIO_CHALLENGE', or 'KEY_PERSONNEL_INTERVIEW_AND_CAUCUS'). Use this tool when preparing for Phase-II advisory down-select oral presentations, live technical demonstrations, or SSEB Q&A caucuses; use `generate_rfp_response` instead for written Volume I Technical Approach prose, or `match_key_personnel` for written Volume II resumes and Letters of Commitment.

• generate_rfp_responseFree

  Draft an evaluator-ready Shipley proposal narrative (complete with Win Themes, Feature-Benefit-Proof blocks, and Risk Mitigations) AND a list of strategic Contracting Officer Clarification Q&A questions from an RFP section and company capabilities. This is a read-only, stateless composite generation call that always returns both the drafted narrative and the clarification questions in a single JSON payload (requires X-RapidAPI-Key; `target_section_type` selects the proposal section format, and `tone_and_methodology` customizes the writing style). Use this tool when writing Technical Approach, Executive Summary, or Management Plan prose; use `generate_compliance_matrix` instead to build a requirement checklist/outline first, or `generate_cpars_past_performance` for structured Volume III CPARS contract citations.

• generate_sources_sought_responseFree

  Analyze agency Sources Sought notices, Market Research RFIs, and Draft PWS/SOWs against a vendor's socioeconomic status (`8(a)`, `SDVOSB`, `HUBZone`, `WOSB/EDWOSB`, Small Business) and past performance to generate a persuasive FAR 19.502-2 Rule-of-Two set-aside justification, a 13 CFR 121.402 NAICS & SBA size standard shaping analysis, a requirement-by-requirement capability alignment matrix, Contracting Officer / OSDBU acquisition-shaping recommendations, and a ready-to-submit Sources Sought / RFI response narrative. This is a read-only, stateless, non-destructive capture shaping generator (requires X-RapidAPI-Key; `sources_sought_or_rfi_notice_text` accepts 20 to 45,000 characters and `vendor_capability_and_socioeconomic_profile` accepts 20 to 35,000 characters). Use this tool during pre-RFP Market Research / Sources Sought / RFI phases to persuade the Contracting Officer to set aside an upcoming procurement for small business; use `match_capability_statement` instead for Gate-1 Bid/No-Bid Pwin scoring on an already-released RFP, or `generate_rfp_response` to draft final RFP proposal volumes.

• generate_teaming_strategyFree

  Generate a legally compliant GovCon Teaming Strategy, a 13 CFR 125.6 & FAR 52.219-14 (Limitations on Subcontracting / 50% Rule) Prime/Sub workshare split, Ostensible Subcontractor risk audit, partner archetypes, FAR Subpart 9.6 Teaming Agreement clauses, and a BD outreach email. This is a read-only, stateless compliance and strategy generator (requires X-RapidAPI-Key; `set_aside_type` enforces SBA workshare ceilings for 'sdvosb' [default], '8a', 'wosb_edwosb', 'hubzone', 'small_business', or 'full_and_open', while `bidder_role` tailors outputs for 'prime_seeking_subs' [default], 'sub_seeking_prime', or 'joint_venture_mentor_protege'). Use this tool when structuring Prime/Sub workshare splits or recruiting teaming partners to fill capability gaps; use `match_capability_statement` instead for an initial single-vendor Bid/No-Bid Pwin score.

• get_live_solicitationsFree

  Retrieve currently open, AI-vetted Federal (SAM.gov) and State/Local SLED (VA, TX, CA, FL, MD, IL, PA, OH, GA, NC, NY, MA, NJ, WA, DemandStar) IT, Cloud, and Cybersecurity solicitations from SignalTender's 16-portal procurement database. This is a read-only, non-destructive live database query (requires X-RapidAPI-Key; all four filter parameters are optional and combinable, returning up to `limit` [default 10, max 50] active solicitations whose closing dates have not passed). Use this tool when discovering active open RFPs to bid on right now; use `search_historical_awards` instead for past awarded contracts and incumbent pricing, or `match_capability_statement` once you have selected an RFP to score Bid/No-Bid Pwin.

• match_capability_statementFree

  Evaluate an RFP scope against a vendor's Capability Statement and past performance to compute a 0-100 Probability of Win (Pwin) score, a Gate-1 Bid/No-Bid recommendation, a technical/socioeconomic gap analysis, and a tailored executive pitch. This is a read-only, stateless capture scoring call (requires X-RapidAPI-Key; both `rfp_text` and `company_capability_statement` are required, while `target_pursuit_role` weights eligibility rules for 'prime_contractor', 'subcontractor', or 'either_prime_or_sub' [default]). Use this tool at Gate-1 capture qualification to decide whether to bid an opportunity; use `generate_teaming_strategy` instead if you already decided to bid and need a 13 CFR 125.6 (50% Rule) Prime/Sub workshare plan, or `match_key_personnel` to evaluate individual candidate resumes.

• match_key_personnelFree

  Evaluate a candidate's resume against RFP Section L/M Key Personnel and GSA MAS / OASIS+ / Alliant 3 Labor Category (LCAT) requirements (years of experience, education, security clearance, DoD 8570/8140 certifications), rewrite relevant roles into a Shipley Key Personnel bio, and generate a ready-to-sign Letter of Commitment (LOC). This is a read-only, stateless qualification audit and resume formatter that does not store candidate PII (requires X-RapidAPI-Key; `allow_education_experience_substitution` [default true] applies standard federal GSA/OPM equivalency rules such as Bachelor's + 4 years = Master's when scoring eligibility). Use this tool when qualifying and formatting individual Key Personnel resumes for a proposal; use `match_capability_statement` instead to score overall company-level Bid/No-Bid Pwin, or `generate_cpars_past_performance` for company-level contract citations.

• parse_b2b_contractFree

  Extract structured contract metadata (contracting parties, effective and termination dates, total contract value, payment terms, key deliverables, security clearances, and governing law) from unstructured B2B contracts, Statements of Work (SOWs), or RFPs into normalized JSON. This is a read-only, stateless, non-destructive extraction call (requires X-RapidAPI-Key; accepts 50 to 100,000 characters in `raw_text`, and `document_type_hint` optionally biases extraction rules toward federal RFP, MSA, SOW, or NDA conventions). Use this tool when you need general commercial or header metadata from a contract; use `extract_pricing_schedule` instead for line-by-line CLIN/rate-card tables, `audit_contract_risks` for toxic clause redlining, or `generate_compliance_matrix` for Section C/L/M requirement shredding.

• scan_far_dfars_clausesFree

  Scan solicitation Section I or subcontract flow-down text to identify every FAR (`52.2xx`) and DFARS (`252.2xx`) clause, flag mandatory subcontractor flow-downs, and score CMMC 2.0, NIST SP 800-171, and FedRAMP compliance burden. This is a read-only, stateless regulatory audit (requires X-RapidAPI-Key; `raw_text` accepts 30 to 100,000 characters, and `contractor_role` adjusts risk severity and flow-down obligations for a 'prime_contractor' [default], 'subcontractor', or 'commercial_item_vendor' under FAR Part 12). Use this tool specifically for federal acquisition regulation (FAR/DFARS/CMMC) clause compliance; use `audit_contract_risks` instead for commercial MSA/NDA legal redlining, or `answer_security_questionnaire` to draft control-by-control NIST 800-171 / SOC 2 questionnaire responses.

• search_historical_awardsFree

  Query historical federal contract awards, incumbent prime contractors, award ceilings, and labor/CLIN pricing benchmarks filtered by keyword, agency, or 6-digit NAICS code. This is a read-only, deterministic database query (requires X-RapidAPI-Key; `keywords` is required and narrows scope descriptions, while optional `agency` and 6-digit `naics_code` filters intersect results and return up to 25 matching awards per call). Use this tool when researching past award prices, incumbent vendors, or Price-to-Win (PTW) benchmarks; use `get_live_solicitations` instead to find currently open RFPs available for bidding, or `classify_naics_psc_nigp` if you need to discover the right NAICS code first.

• –Code scanremote-only server, no package to scann/a
• Live reliabilityremote reachable in 828ms20/20
• Tool poisoning22 tool descriptions checked15/15
• Auth qualityopen endpoint, read-only tools10/15
• Maintenancelast push 0 days ago15/15
• Maintainer identityregistry namespace matches repository owner6/10

Safety score

88/100

higher than 75% of 48,255 servers

Tools

22

the typical server has 7

Tools that change things

0%

typical: 0%. Fewer write tools means less an agent can break

Uptime

100%

of our recent checks; the typical remote server answers 100%

Response time

225 ms

faster than 59% of 30,031 servers

SignalTender B2B, GovCon & LegalTech MCP Server: common questions

Is SignalTender B2B, GovCon & LegalTech MCP Server safe?

Yes, by our scan: it is graded A (88/100). Read the SignalTender B2B, GovCon & LegalTech MCP Server safety report

How do I install SignalTender B2B, GovCon & LegalTech MCP Server?

It runs remotely at b2b-contract-parser-api.onrender.com. Add it to Claude Code, Cursor, VS Code or Claude Desktop with the snippets above, or call it through the mcp.market gateway without installing anything.

Does SignalTender B2B, GovCon & LegalTech MCP Server need an API key?

Not as far as the registry entry and our scan can tell: no credentials are declared or required.

Is SignalTender B2B, GovCon & LegalTech MCP Server maintained?

The last commit was 10 days ago (2026-10-25). The latest release is v1.5.0.

Is SignalTender B2B, GovCon & LegalTech MCP Server up?

100% of our last 28 checks got an answer. We check remote servers about four times a day.

How does SignalTender B2B, GovCon & LegalTech MCP Server compare with other MCP servers?

safety score 88/100 (higher than 75% of 48,255 servers); tools 22 (the typical server has 7); tools that change things 0% (typical: 0%. Fewer write tools means less an agent can break). Full comparison.