Mmcp.market

Reference MCP server

by cuttingtoolsai.eu·eu.cuttingtoolsai/reference·v1.0.0
No reviews yet

Brand-neutral cutting tool reference: grade cross-reference, materials, turning starting values.

C69/100grade C
Write a reviewRun it
What users say
No reviews yet
Be the first
Safety scan
C69/100

full report

Adoption
New

Little public usage data yet

Reviews

Write one

Nobody has reviewed Reference yet.

If you have run it, two minutes of your experience saves the next person an afternoon.

Reference tools (3)

write = sends, deletes, buys or posts
  • grade_cross_referenceFree

    Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / independently confirmed / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.

  • material_cross_referenceFree

    Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.

  • speeds_feeds_starting_valuesFree

    Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.

Public scan report

scanner v0.1.9 · 2026-09-20 · same rubric, same numbers if you re-run it

1 low
  • –Code scanremote-only server, no package to scann/a
  • Live reliabilityremote reachable in 714ms20/20
  • Tool poisoning3 tool descriptions checked15/15
  • Auth qualityopen endpoint, read-only tools10/15
  • Maintenanceno repository listed3/15
  • Maintainer identityverified namespace with website, no repo4/10

Findings (1)

  • lowNo source repository listedmaint.no-repo
Overall 69/100. Components that don't apply are left out of the denominator. Any critical finding is an F.RubricAppeal a findingJSON

Install directly

claude mcp add --transport http reference https://cuttingtoolsai.eu/mcp
Add to Cursor

Reference: common questions

Is Reference MCP server safe?
With care: it is graded C, so read the findings first (69/100). Read the Reference safety report
How do I install Reference?
It runs remotely at cuttingtoolsai.eu. Add it to Claude Code, Claude Desktop or Cursor with the snippets above, or call it through the mcp.market gateway without installing anything.
Does Reference need an API key?
Not as far as the registry entry and our scan can tell: no credentials are declared or required.
Is Reference maintained?
The latest release is v1.0.0.
Is Reference up?
100% of our last 8 checks got an answer. We check remote servers about four times a day.

More from cuttingtoolsai.eu →